People who fix metal roofing should ensure that they have proper footwear to prevent the risk of falls, slips, and injuries. You can find affordable footwear specifically designed for walking on metal roofing in various home improvement stores or from sheet metal fabrication dealers.

The Hazard
It is easy to slip and fall if you are walking on metal roofing with shoes that are not designed for metal surfaces. One slip from a steep roof can result in a bad fall to the ground. Although a wooden crossbeam attached to the roof and a properly tied safety rope may help, footwear with adequate grip should be considered for extra safety. There are three basic types of footwear for metal roofing.

Work Boot – Mounted Sandals
Manufacturers of safety footwear products offer tie on sandals that can be attached to your work boots or steel-toed shoes. Sidewall, webbing, and strapping options vary with each sandal. The type of mounted sandals you use is determined by the pitch of the roof you are going to work on. Buckles, sturdy straps, and D-strings are recommended for higher pitched roofs.

Special Spikes
For more grip on wet surfaces, add threaded spikes on the work boot-mounted sandals. Soft aluminum threaded spikes are the best for metal roofing surfaces because they prevent roof perforation. In addition, the spikes are removable, which means that you can use different types of spikes depending on the metal roofing that you are working on. Some safety footwear feature firm, non removable soft aluminum spikes .These are ideal for people who work on metal roof surfaces only.

Gripper Soles
Gripper soles are an alternative safety shoe for metal roof surfaces. They are made of foam rubber pads designed to attach to strap on sandals or directly attached to safety shoes and boots. Gripper soles can be worn and interchanged when necessary. They allow owners to save by replacing safety soles instead of buying new safety boots. This type of footwear is available in any store that sells industrial safety equipment and clothing.

When working on a metal roof, it is important to prioritize your safety because metal roofing can be quite slippery compared to other types of roofing. One of the most important safety measures involves wearing the right type of shoes with adequate grip. Safety boots for metal roofing can be found in various sheet metal roofing stores or online. If you would like to learn more, visit Heather & Little Limited.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *