Monthly Archives:August 2016

Common Wireless Laser Printer Problems Solved

Steven No Comments

Wireless laser printers within the office environment are often considered infinitely more useful than they are not. That being said, most printers offer a slew of challenges that most office workers are not experienced enough to fix on their own. These issues tend to cause more problems in the office than anything else. With lines developing for its use, paper jams slowing down work production, and calls to tech support tying up phone lines when you could be speaking to a client.

Fixing your wireless laser printer doesn’t need to be a headache, though. The following are a few common printer problems and how you can solve them on your own.

Printer Won’t Print

One of the most common problems a printer experiences is being unable to print that important document you require immediately. With a wireless printer, check to make sure you are connected via Wi-Fi and to the right network in the office. The printer driver and software will need to be installed on any computer that you regularly print from, so double-check to make sure that is correct, too. There is a chance that the driver has become corrupted, which means a reinstall will be required.

Running Out Of Ink

Believe it or not, this is a common problem that many offices face. The wireless laser printer claims it is running out of ink, but you can still print documents with ease. You won’t need to rush and replace the ink cartridges immediately, but you should check the ink tank level indicators within the costly machine to be sure. The accuracy of a ‘running out of ink’ warning tends to vary depending on model and manufacturer. You may only receive the low-ink warning when you are critically low, or you could receive it when you need to keep an eye on it within the next few days.

Mobile Device Troubles

If your printer is completely wireless and connected via Wi-Fi to the office network, you should be able to use a mobile device – such as a smartphone or tablet – to print any office documents and paperwork you need. Most modern Wi-Fi printers support AirPrint, which allows iOS devices to connect with ease. Most major printer manufacturers have also released their own standalone apps for iOS and Android. Download one of these apps to ensure you can connect to the printer.

Printing Time Takes Too Long

In order to reduce print time and throughput on your wireless laser printer, place the machine as close to the router as possible. This ensures the printer can receive a dedicated, stable connection from your internet. Alternatively, you may choose to add a wireless extender or repeater to increase printer performance while connected to the internet. Visit West X Business Solutions to learn more.

What Type of Shoes Are for Metal Roof Fabrication?

Steven No Comments

People who fix metal roofing should ensure that they have proper footwear to prevent the risk of falls, slips, and injuries. You can find affordable footwear specifically designed for walking on metal roofing in various home improvement stores or from sheet metal fabrication dealers.

The Hazard
It is easy to slip and fall if you are walking on metal roofing with shoes that are not designed for metal surfaces. One slip from a steep roof can result in a bad fall to the ground. Although a wooden crossbeam attached to the roof and a properly tied safety rope may help, footwear with adequate grip should be considered for extra safety. There are three basic types of footwear for metal roofing.

Work Boot – Mounted Sandals
Manufacturers of safety footwear products offer tie on sandals that can be attached to your work boots or steel-toed shoes. Sidewall, webbing, and strapping options vary with each sandal. The type of mounted sandals you use is determined by the pitch of the roof you are going to work on. Buckles, sturdy straps, and D-strings are recommended for higher pitched roofs.

Special Spikes
For more grip on wet surfaces, add threaded spikes on the work boot-mounted sandals. Soft aluminum threaded spikes are the best for metal roofing surfaces because they prevent roof perforation. In addition, the spikes are removable, which means that you can use different types of spikes depending on the metal roofing that you are working on. Some safety footwear feature firm, non removable soft aluminum spikes .These are ideal for people who work on metal roof surfaces only.

Gripper Soles
Gripper soles are an alternative safety shoe for metal roof surfaces. They are made of foam rubber pads designed to attach to strap on sandals or directly attached to safety shoes and boots. Gripper soles can be worn and interchanged when necessary. They allow owners to save by replacing safety soles instead of buying new safety boots. This type of footwear is available in any store that sells industrial safety equipment and clothing.

When working on a metal roof, it is important to prioritize your safety because metal roofing can be quite slippery compared to other types of roofing. One of the most important safety measures involves wearing the right type of shoes with adequate grip. Safety boots for metal roofing can be found in various sheet metal roofing stores or online. If you would like to learn more, visit Heather & Little Limited.